How to Recover Deleted Photos From Android

Hello friends, Now we are going to discuss a very important trick that every Android users must know it, i.e How to Recover deleted photos Android . Sometimes we unfortunately  delete our photos or had our smartphone accidentally wipe everything from  gallery . Don’t fear, you lost your photos are not really lost at all. Our team had a solution to Recover or Restoring deleted photos from android devices. Our team discuss with you a complete tutorial  to recover deleted photos from android. You just stay here and follow steps you can easily recover deleted photos just like a morning walk in a park.

Steps to Recover Deleted photos

First and Foremost thing is that we should act fast.

Step 1 #

Switch off Wi-Fi or Mobile data. This is necessary because files, photos or some multimedia will not be deleted permanently until something written over it. If you use mobile data or Wi-Fi something will be written over it and you may lost your photos permanently.

Step 2 #

Then Download the application called Dr Fone for Android by Wondershare to your PC/Computer (available for Mac also). There are many recovery tools but Dr Fone is providing consistent results and all android users are satisfied with its performance.

Download Dr Fone for Android by Wondershare

Step 3 #

Install Dr Fone in PC, launch it. The screen look like this .

Step 4 #

Connect Your Android device/phone to PC with a USB cable in USB debugging mode. Some Android phones directly show USB debugging mode. If you don’t see enable USB debugging option we have a procedure below , you just follow .

Go To: Settings > About your Phone > Build Number

Note : You just hit on Build Number repeatedly untill you see the USB debugging Notification.

Step 5 #

Once connection is established between PC and Android Phone you have a display box like this.

You can recover Photos, Messages, Videos, Contacts and Other Multimedia etc.

Step 6 #

Check box which you want to recover, Select Gallery to recover photos and check select all if you want to recover all including contacts, messages etc.. that shown in above display box and proceed with next button.

Step 7 #

Check Scan for deleted files rather than Scan for all files because it consumes less amount of time to scan and also you want to recover just recently deleted files.

Step 8 #

Tap next then Dr Fone will analyze your Phone that is analyzing your device prior entering to scan.

Then it will restart / reboot your Android Phone. After this you will see scan results and then select photos or files which you want to recover and tap recover button and you are done.

 DOWNLOAD NOW

That’s it you just follow  procedure you can easily recover deleted photos On Android. We hope you enjoyed this How to recover deleted photos from Androd article. If you face any query feel free to leave a comment below.

Thanks

Read more ...

10 Important Free Full Software You Must Have

Whether you’ve bought a new computer that includes only the installed operating system, or your PC has been formatted and you lost all applications you had before. In order to obtain the necessary capabilities to perform everything you need using your laptop, is extremely important to download and install these indispensable apps for your everyday use.

Before you decide what will be the applications that we install on you PC, it is necessary to be clear and we must emphasize on functionality, in order to obtain the desired results. Then you get closer information about the basic software that every computer should have to function properly or offer us the possibility to carry out our daily tasks without inconveniences. Here are 10 Important Free Full Software You Must Have.

1- Antivirus Software:

A software that should never miss on a computer is an antivirus, which will allow us to maintain the integrity of the team, protect computer system and residual files since it is a tool whose goal is to detect and remove computer viruses, as well as also different types of malware, spyware, Trojan, worms, etc. We have almost shared the most popular full version of Antivirus software on softasm. Here are the top security apps:

ESET Endpoint Antivirus 6.3.2016.0 + Crack x86x64

2- Optimization and maintenance software:

To maintain the cleanliness of our operating system, nothing better than to install a clean temporary. This tool is essential in the event that the PC to be used by the whole family. Currently the best app to keep our system clean is the famous CCleaner, which through its simple operation allows us to eliminate all unnecessary information from the computer.

CCleaner 5.12.543 All Editions + Crack

3- Archiving software:

We must not forget we include a program to compress and decompressor files, since it is an essential tool to send or receive multimedia type material by compressing the same weight. In this case we can opt out of the use of the traditional Winzip, WinRar either choose other so many existing alternatives, as for example 7-Zip, which has support for the most used formats today, which include the RAR and ZIP, in addition of course of its own 7Z format.

WinRAR 5.31 Beta 1 Full + Crack (x86x64)

4- Microsoft Office software:
Within the large number of variants that exist today, one of the suite of office used by the majority of users is often a known Microsoft Office.

Microsoft Office 2016 Professional Plus + Crack (x86x64)

5- Photo editing software:

MAGIX Photostory 2016 Deluxe 15.0.2 + Crack

6- Video editing software:

Corel VideoStudio Ultimate X9 + Crack (x86x64)

7- Data Burning software:

Ashampoo Burning Studio 2016 Incl Crack

8- Data recovery software:

Wondershare Data Recovery 5.0.0.5 + Crack

9- PDF Editor software:

Wondershare PDFelement 5.7.4.4 Incl Crack

10- Audio / Video Recording software:

Mirillis Action 1.27.1 Multilingual + Serial

Read more ...

SD Maid Pro – System Cleaning Tool v3.1.4.6 Cracked APK [Latest]

1. New

   ​

   
   SD Maid Pro – System cleaning tool is a free app for the Android by darken which will clean and can regain precious memory of your Android phone.
   SD Maid is intended for rooted devices which is an app that can tidy up your Android device with a list of tools that can help your Android function better and faster. The app is simple enough to use and can also optimize and shrink bloated databases to speed up access and free up space.
   
   Features:
   Explorer is a full fledged filemanager, use it to crawl through your Androids files.
   Preview:
   
   

   ​

   
   
   Info:
   File Name : SD Maid Pro – System Cleaning Tool v3.1.4.6 Cracked APK [Latest]
   File Size : 4.3 MB
   Publisher : not-available
   OS Support: Android
   
   

   

Read more ...

How to Hack WiFi (WPA2/WEP/WPA) Full + Tools CS Team BW

 
Disclaimer: I (The creator of the video has already stated this, but I'd like to go over it again) do not take any responsibility for your actions regarding this tutorial. This was made by the creator to demonstrate weaknesses in wireless networks and for educational purposes only. Breaching other people's wireless networks without permission is against the law. If you want to test this tutorial, try it on your own home network.


We will be using Dumpper and other suites to hijack WPA2/WEP/WPA WiFi networks. It'll let you join


without a password, then you can get the password from inside the network. I'll show you how towards the end of the tutorial. First, download all of the programs above. Now, follow these instructions for setting it up:

1. Download (Link is Given Below) and Extract file than install JumpStart, WinPcap, and Dumpper.
2. Open Dumpper.

Your programs are set up and ready to go, now begin the process:

1. In the 'Networks' tab, select the network adapter you wish to use. Hit the 'Scan' button now.
2. After it completes the scan, go over to the 'Wps' tab. In the area that says 'Connect using JumpStart', hit 'Browse' to select the location of where you installed JumpStart in the previous set-up steps. (By default, it installs in C:\Program Files (x86)\Jumpstart. Don't open it, just select the 'Jumpstart' folder and click 'OK')
3. In the area 'Show default pin', select 'All networks' isntead of 'Only known networks'.
4. Hit the 'Scan' button.
5. Select the network you wish to penetrate. Remember the 'Pin' corresponding to your network in the scan results, this will be needed for later.
6. In the previous area 'Connect using Jumpstart', hit the 'Start JumpStart' button.
7. Under 'What do you want to do?', select 'Join a wireless network' and hit 'Next'
8. Under 'Which setup method do you want to use?', select "Enter the PIN from my access point" and enter the PIN next to your network in the scan section back in the previous scan results.
9. Finally, select the targeted network from before and hit 'Next'.

Now you're happily connected with WiFi network you just penetrated. Do you want to see the password of the connected WiFi so you can get on from other devices without doing this process?

Follow these simple steps to get or see the password of WiFi:

1. Open the menu where you join WiFi networks/view the network you're connected to.
2. Right click on the network you just joined and hit 'Properties'
3. Under the 'Security' tab, you can see the password, but it's just dots. Check the 'Show characters' box under it.
4. The password will then reveal itself.

Done

Before asking any question follow and apply the given steps properly.

EDIT: Some formatting to make it easier to read

Download Wifi Hacking Tools - CYBERPlus Solutions​

Read more ...

BOOST YOUR ANDROID PHONE MEMORY BY MOVING APPS TO ROM

If you are struggling for space, you can boost your Android Phone memory by putting any wasted memory in your system ROM to good use. There are two major problem with the system space on your typical Android device. This is where the Android system itself lives, but even then there’s usually some space left over that you can’t access by default. Secondly, when you update per-installed system app(for example G-mail) you’re actually installing the newer version as a complete download in the user space. The older version in the system is masked rather than overwritten, creating unnecessary duplication and eating up memory. The Titanium Backup app can solve both of these issues. Once you’ve rooted your device you can move apps into the system space, making use of this previously wasted memory and freeing up more internal memory in the process. How to Root your android Device will be posted soon

HOW TO BOOST YOUR ANDROID PHONE MEMORY [STEP BY STEP GUIDE]

INSTALL TITANIUM BACKUP ROOT

Titanium Backup Root  has all the functionality you need to finally start using the system space, so download it from Google Play store. To access all the features, you’ll need to purchase the paid for pro version.

According to Titanium Root Developers

“You can backup, restore, freeze (with Pro) your apps + data + Market links. This includes all protected apps & system apps, plus external data on your SD card. You can do 0-click batch & scheduled backups. Backups will operate without closing any apps (with Pro). You can move any app (or app data) to/from the SD card. You can browse any app’s data and even query the Market to see detailed information about the app.”

SUPERUSER

Titanium Backup require the SuperUser App that was installed when you rooted your device, and check that Titanium Backup is on the ‘Allow’ List. If it is not, then tap Titanium Backup in the list and toggle the happy/sad Android icon in the tool-bar.

REVIEW AVAILABLE MEMORY

Open the Titanium Backup app. On the first screen, you get an insight into how much memory is available to your internal memory or any SD cards. Tap the ‘Backup/Restore’ button to review all the available apps.

CONVERT TO SYSTEM

Long Press on the application you with to move to the system ROM. In the subsequent menu, slide the screen to the right to access the ‘Special Features’ section. Scroll down to the system to the ‘System ROM’ sub-heading and tap the ‘Convert to system app’ option.

HAS IT WORKED?

Once the process is fully completed, you need to open the application to check it’s running correctly. If you encounter any serious issues, you can always reopen Titanium Backup and return to the system Rom section. Tap the new ‘Convert to user’ App option to undo the move.

Read more ...

HOW TO USE SOUND IN SAFE MODE (WINDOWS)

What is Safe Mode?

Safe mode helps you identify errors and problems you may have when using Microsoft Windows. It is an important option which starts Windows using only a small number of drivers and files. When this mode is activated, the words “Safe Mode” are shown in the corner of your screen.

What are the Advantages of Safe Mode?

If you are in safe mode and the problem you were having no longer occurs, you know that it was not caused by the elements which are active in safe mode, such as the basic drivers and default Windows settings. You can then tackle the initial problem using a process of elimination; this involves opening and checking your most commonly used programs in an attempt to pinpoint the exact issue. Recently installed programs or drivers are often the cause of problems in Windows, so make sure you monitor these particularly closely.

How do you Access Safe Mode?

Follow these three simple steps:

1 – Having ensured that all CDs, discs, and USB devices have been removed from your computer, restart your system as normal, from the Start menu in the bottom left-hand corner of the screen.

2 – When your computer begins the process of restarting, press and hold down the F8 button. This must happen before the Windows system logo appears on the screen, otherwise you will have to restart your machine again.

3 – Safe mode should now be activated; you can check that it is in operation by looking for the words “Safe Mode” in the corner of the screen.

Safe mode occasionally starts without prompting from the user. This is a sign that something in your system is not allowing Windows to start up as normal. The best remedy for this occurrence is to click on Recovery in Control Panel, once Windows has loaded.You now know the benefits of using safe mode in Windows, as well as the knowledge to implement it. This should assist you in solving many future problems you experience whilst using Windows as an operating system.

Download this registry and run it in your laptop, restart to safe mode and check. 

Comment below if it worked for you

Read more ...

How To Run Windows Programs Without Installing Them

Run Windows Programs Without Installing 2015

There are billions of individuals who are using the Windows OS (Operating System) in their laptops and PC.
What makes these billions of satisfied users significant is they consider Windows as a user-friendly operating system.Normally, whenever we install any tool or program in Windows , it gets automatically installed in the memory.

There are various programs which we will be using in our day-to-day life on the PC and these programs are loaded

and run on the RAM (Random Access Memory) of our PC.

This increase the memory loads and reduces the speed of
the computer . However, there are ways where one can increase the speed of the system and reduce the load of
the memory. Yes! It is possible to run windows program without installing and the method is given below.

Steps Involved in Running Windows Program without Installation:

Step 1:- The first thing what you need is a program which can assist you in running various tools and programs without doing the actual installation on the major memory.
For this you can use the Zero installer tool.

Step 2:- You need to download and get the software installed in your laptop or PC. For this you need to download here. Once you have installed, then

you can launch the program.

Step 3:-  After that you have to click on the catalog section present in the tool. Once that is done, you need to refresh the server by clicking the refresh button given on the screen.

Step 4:- Then you can view the list of various applications which would be running on the zero installer and you can select the required apps from the given list. Zero installer tool

Step 5:- Some may select the Firefox or Mozilla browser for doing the installation of the zero installer. Once you have downloaded the tool, then you need to run the software in zero installer. run windows programs without installing.

Step 6:-  Here the software would run without physically installing into the PC or laptop.

Step 7:-  Once that is done, you can install as well as run any of your favorite applications on the Windows PC without physically installing it.

Frankly, the above given are some of the steps which you can follow to save the computer memory which is getting trapped by such programs and this would indefinitely help in increasing the processing speed of the PC. + you do have the option to do multiple works on the PC.

Read more ...